Handlebars

For all the off-road drop bar fans, Velo Orange offers the Far Bar, an affordable off-road drop bar. With off-road drop bars, most riders have the bars set up at the same height as they would have flat bars set to. Most of the time you are riding, your hands are on the hoods of the brake levers. Then, for steep descents, put your butt back behind the saddle and use the drops to get a better grip on the brake levers. You can run brifters or standard road brake levers on them and use bar end shifters as well. The Daija Cycleworks crest appears on each side of the 31.8 mm clamp area. These bars are a little different then road bars in terms of measuring the width. The listed width - 44cm or 48 cm - is measured center of the drops to centre of the hoods. The overall width is 585mm for the 44cm size, 625mm for the 48cm size. - Weight: 292g - Drop: 110mm - Drop Bend Style: Compact - Reach: 76mm - Material: Aluminum - Bar Top Style: Round

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)

Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g

The Surly Corner Bar is for off-road riders who want to give drop bars a try without swapping out the drivetrain and brake levers on their current mountain setup. Does that make it an economical option for fresh excitement on the trail? Yes, it does. - Chromoly steel with custom-butted tubing - 22.2mm grip diameter - 25.4mm clamp diameter - One set of 25.4/31.8 x 60mm Problem Solvers shims included

If variety is the spice of life, then the Moloko bar oozes umami at every bend. It offers a multitude of hand positions to keep you comfortable and in control over the course of a long day riding over varied terrain. It also has plenty of spots to mount your various accessories. Dangle a handlebar bag from it, strap some lights to it, throw a GPS on it (if that's your thing), and ride all day. It comes in a standard width of 735mm but if 685mm is more your style, don't you worry. Surly added cut marks so you can easily make it so. - Material: CroMoly steel - Clamp diameter: 31.8mm - Width: 735mm; Cut marks for 685mm - Rise: 0 - Sweep Angle: 34 degrees - Weight: 709g - Color: E.D. coated Black

Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.

In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black

The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

• Lightweight aluminum construction • Back sweep: 6 degrees

Forged aluminum construction with a retro curved design.

Building up an urban fixie or townie bike? Then you just have to have the classic Bull Horn Bars from Sunlite. They're made from aluminum with a steel center sleeve, so they're light, stiff and durable.

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

Heavy-duty steel construction.

- Timeless, classically styled back swept touring bar - Bar end shifter and brake lever compatible - Outward grip angles for proper ergonomics - Material: Steel

Chrome plated long-horn style design.

Lightweight aluminum construction with a versatile riser bar design.

Sturdy steel construction with a versatile riser bar style.

- Slightly shorter version of the popular hi-rise style - Available in chrome plated and black versions

Sunlite's Road Handlebars are a light and comfortable addition to your road bike or gravel grinder. At 310 grams, this aluminum bar keeps your rig light while providing plenty of stability while cornering or sprinting for the hole shot. The classic road bend gives your bike a svelte look, too. And with plenty of widths to choose from, you get a bar that's tailored to your build and riding style.

Heavy duty steel construction with a retro curved design.

Chrome-plated steel North Road style touring handlebar.

Anyone who victoriously tears off their shirt after a clip, definitely deserves their own bar. Brett Silva has been on a tear lately and we're stoked to be offering the new BRETT bar. - Brett Silva Signature - Laboratory tested and team proven 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection - Guaranteed against manufacturing defects

Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection

Stolen Roll bar features multi-butted 4130 chromoly, 19mm cross bar, and P2 post-production heat treatment for increased strength. - Bar Clamp Diameter (mm): 22.2mm - Color: Black - Material: Steel - Rise: 9.5-inch

Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise. - High-strength 7000-series premium aluminum alloy - Rise: 10mm - Width: 750mm and 780mm - Clamp diameter: 31.8mm

Comp Alloy Short Reach Flare Rd Bar from Specialized.

Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Expert Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. - 15mm rise for additional rider fit range. - Constructed from 2014 Premium Butted Aluminum for a high-strength design. - Shallow Bend Drop: 123mm drop x 75mm reach

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why Specialized designed the S-Works Hover Carbon Handlebars to excel on both fronts. Starting with the construction, they're made from their FACT carbon fiber for a light overall weight, vibration absorption, and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop and bend that's extremely comfortable, while they also offer a 15mm rise to help accommodate a wide fit range. - FACT carbon construction offers an optimized blend of durability and light overall weight. - 15mm rise for additional rider fit range. - Shallow Bend Drop: 123mm Drop x 75mm Reach

- 6061 Premium butted Aluminum, high-strength design. - Short reach for optimal brake/shift control. - Shallow Bend Drop: 125mm drop x 65mm reach

- Award-winning Vibrocore foam core provides vibration-damping, proven to reduce arm pump and hand-numbness - 25° aggressively flared, wide drop bar for true off-road performance and comfort - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding in a more upright, balanced stance - 8mm bar clamp extends through the top section, providing enhanced hand support and comfort without multiple wraps of tape to increase diameter - Round profile upper section facilitates a wide range of rider/hand positions and maximizes grip on the bars in rough terrain - Recommended for: ASTM 3, Gravel Features: - Key Technologies: Vibrocore, On-Off Road Geometry - Material: Zirconium Doped 7-Series Alloy - Width, Hood to Hood (c-c): 420 / 440 / 460 / 480 / 500 / 520mm - Width, Barend to Barend (o-o): 562 / 582 / 602 / 622 / 642 / 662mm - Weight (g): 345 / 350 / 355 / 370 / 375 / 380 - Drop/Reach: 110mm / 65mm (all sizes) - Flare: 25° - Ramp: 14°

- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

Zipp Vuka / Stealth Riser Kits - Bolt kits sold separately

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon. It’s light… Like, 185 grams light. But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment. - Material: High modulus carbon fiber - Width: 780mm, includes cut marks to customize width - Rise: 0mm or 20mm - Upsweep: 6 degrees - Backsweep: 8 degrees - Clamp Diameter: 35mm - Weight: 185g

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

DH tough and XC light, the Traverse SL 35 is our handlebar premiere, and capitalizes on our decades of carbon fiber experience to deliver precise control and exceptional comfort, along with class leading strength to weight performance. Handlebars have grown wider in recent years, and this has presented some interesting challenges. Because bars are wider, leverage stress exerted at the stem has risen dramatically. The Traverse SL features a 35mm diameter at the stem clamp; this increases strength in this crucial zone, while also dissipating the bar clamp load across a larger surface area. More secure clamping, and a stronger handlebar - these are good things. Meanwhile, our extensive experience with carbon fiber allows us to ensure maximum strength at the clamp and then tailor the carbon fiber layup to providing damping at the bar-ends, resulting in a more comfortable, less fatiguing ride. The Traverse SL 35 is strong enough to attack the gnarliest terrain, durable and comfortable enough to hammer the chunder day in, day out, and light enough to make XC racers smile. - Backsweep: 8 degrees - Clamp: 35mm - Rise: 30mm - Upsweep: 6 degrees - Weight: 227 grams

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

The Renthal Fatbar Lite is the ultimate lightweight, trail-proof aluminum handlebar. Designed and developed to offer the ultimate combination of lightness, strength and durability. - The Fatbar Lite is the ideal handlebar for a wide range of disciplines, from trail riding, right through to XC and Enduro racing - Exclusive Series 7 aluminum is heat treated to provide strength and durability - Shot peened to increase fatigue life and durability - Hard anodized to keep your handlebar looking new

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control