The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad. - Wheel-on design sets up with two easy clicks and securely locks in place - Measures speed, power, and cadence - Virtually silent flywheel lets you ride without disturbing others - Works with popular third-party training apps such as Zwift and Tacx - Train with realistically simulated inclines up to a 7% gradient FEATURES Type of trainer: Interactive Smart trainer with electric brake Magnets: 6 Magnets Transmission: Roller, 30mm Electrical requirements: 110-240 Volt Power indicator: None Connection indicator (ANT/BT): None Firmware upgradable: Yes Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm) SPECIFICATIONS Max. power (40 km/h): 800 Watt Max. incline: 6% Simulation of descent: No Max. torque: 15.3 Nm Max. brake force: 45 N Flywheel: 1.6 kg Mass inertia: 11.8kg (26.0 lbs) Calibration: Spin down Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in) Height: 410 mm (16.1 in) Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in) Weight: 9.41 kg (20.7 lbs) Article number: T2240 DATA OUTPUT AND CONTROL Wireless communication: ANT+ FE-C, Bluetooth Smart open Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone Output: Cadence , Power , Speed Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet Error Tolerance: <5%
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer. Three different thread pitches ensure a perfect fit for whichever axle you're using.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
The Saris thru axle adapter is designed for indoor use on Saris- and CycleOps-branded trainers only and should not be ridden outdoors. Compatible with current classic series trainers. Not compatible with the JetFluid Pro, SuperMagneto Pro, PowerBeam Pro, or PowerSync trainers. Contact us with trainer compatibility questions. - This adapter is designed to work with bikes that have a 142x12mm or 148x12mm thru axle with 1.0 or 1.75 thread pitch. - The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. - Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. - Adapts a thru axle hub bike for a trainer - Only compatible with current basic trainers - Fits most 142-148mm thru axle bikes with 1.0 or 1.75 thread pitch
The Saris 20/24-inch Wheel Adapter allows you to use your BMX or recumbent bike with your trainer.
Connect your PC to CycleOps VirtualTraining.
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
- Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise.
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
Misuro B+ is the perfect sensor to enhance your training sessions with Elite home trainers and rollers. This ANT+ and Bluetooth Smart Speed/Power/Cadence sensor monitors indoor training sessions via smartphone, tablet, cycle computer, or compatible GPS devices when installed on an Elite trainer. - Reads data based on the type of trainer used. - Uses ANT+ and Bluetooth Smart protocols that are compatible with many devices. - When paired with the My E-Training Software, it turns your Elite trainer into an advanced digital instrument that displays and manages fundamental training data.
This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage
The latest innovation from Wahoo will literally take your indoor training to the next level! KICKR CLIMB indoor grade simulator is designed to work exclusively with the new KICKR and new SNAP and when paired, it will add physical grade changes to your indoor training. The CLIMB is compatible with Third Party Apps, so whether riding a virtual course or performing a structured workout, KICKR CLIMB blends ascents and descents with resistance changes for a truly immersive indoor training experience. The world isn’t flat; now, neither is your ride! Specs: Max Incline: 20% Max Decline: -10% *Exact grade changes dependent on bicycle size, wheel size and trainer type. Compatible Trainers: New Wahoo KICKR (2017 Edition) and New KICKR SNAP (2017 Edition) Metrics: Current Grade Dimensions: 25.75" H x 5.1" W x 7" L Supported Hubs: QR, 12x100, 15x100, 15x110 Wireless Software Updates: Yes 3rd Party App Compatible: Yes, when paired to a KICKR or KICKR SNAP
The KICKR CORE is the latest in Wahoo's line of smart indoor bike trainers. It delivers a realistic, accurate, and quiet indoor training experience by using the proven flywheel technology and advanced algorithms of Wahoo's legendary indoor bike trainers. The KICKR CORE indoor trainer is built with the durabilty to withstand all of your indoor training sessions and no other brand of smart trainers has more apps and software training options, including Zwift and Trainer Road. PLEASE NOTE: Some assembly is required. The KICKR CORE does not include a cassette or wheel block. These items can be purchased separately. Specs: Dimensions (legs open): 20"L x 23"W x 19"H Dimensions (legs closed): 9"L x 23"W x 21"H Weight (unboxed): 40 lb Rear Wheel Size: 24" RD / 24" MTB / 650c RD / 26" MTB / 700c RD / 650b MTB / 29" MTB Hub Types: 130/135mm QR, 12x142, and 12x148 Thru Axle Adapters: Included Drivetrain: Cassette not included. Requires Purchase/Installation of New Cassette: 8/9/10/11 Speed SRAM/Shimano KICKR CLIMB: Compatible Yes RPM Cadence: Not Included Front Wheel Block: Not Included Resistance Type: Electromagnetic Accuracy: + / - 2% Wireless Software Updates: Yes 3rd Party Power Meter Support: Yes Connectivity: ANT+, ANT+ FE-C, and Bluetooth Devices: iOS, Android, PC (Mac and Windows) Max User Weight: 250 lb Power Requirements: 100-240V~1.5A 50-60 Hz Flywheel Weight: 12 lb Maximum Simulated Grade: 16% Maximum Power Output: 1800W
Building on the proven success of Wahoo’s line of KICKR Smart Trainers, the new 2018 edition delivers a virtually silent experience and a specially engineered, heavier flywheel to provide cyclists with the exact inertia they need to recreate the feeling of riding outdoors. The KICKR continues to provide the best in class indoor smart trainer design with carbon steel body for the durability. Its unmatched compatibility expands to include our new indoor grade simulator, the Wahoo KICKR CLIMB, and our new Bluetooth and ANT+ powered fan, the KICKR HEADWIND. The KICKR includes an 11 speed cassette for easy setup and an RPM cadence sensor. Specs: KICKR Version: 4 Dimensions (legs open): 20"L x 28"W x 17"H Dimensions (legs closed): 20"L x 9"W x 17"H Weight (unboxed): 47 lb Rear Wheel Size: 24" RD / 24" MTB / 650c RD / 26" MTB / 700c RD / 650b MTB / 29" MTB Hub Types: 130/135mm QR, 12x142, and 12x148 Thru Axle - Adapters included Drivetrain: Out of Box: 11 Speed Cassette with 11-28 ratio Requires Purchase/Installation of New Cassette: 8/9/10 Speed SRAM/Shimano KICKR CLIMB Compatible: Yes KICKR HEADWIND Compatible: Yes Cadence: RPM Cadence Sensor included Front Wheel Block: Not needed Resistance Type: Electromagnetic Accuracy: + / - 2% Wireless Software Updates: Yes 3rd Party Power Meter Support: Yes Connectivity: ANT+, ANT+ FE-C, and Bluetooth Devices: iOS, Android, PC (Mac and Windows) Max User Weight: 250 lb Power Requirements: 100-240V~1.5A 50-60 Hz Flywheel Weight: 16 lb Maximum Simulated Grade: 20% Maximum Power Output: 2200W
The KICKR HEADWIND is the first ever smart fan, designed with the cyclist in mind. Its Targeted Airflow Pattern mirrors the shape and position of a cyclist's body while riding. The KICKR HEADWIND is sensor controlled so as your speed or heart rate increases, so will the fan speed, and there are also 4 manual speed settings should you want to set your own ideal airflow. With speeds of over 30 mph (48 kph), the KICKR HEADWIND will keep you cool during the toughest training sessions. Specs: Part Number: WFBKTR7US Motor Spec: 120v 60hz Dimensions (leg tucked): 16"L x 12"W x 19"H Dimensions (leg extended): 18"L x 12"W x 19"H Weight: 12 lb Max Fan Speed: 30 mph/48 kph Wireless Software Updates: Yes Connectivity: Bluetooth - Pair to phone to control the fan speed via app ANT+ - Pair to speed sensor, heart rate monitor, or smart trainer to control fan speed Adjustable Leg: Yes - 2 Positions
The Wahoo KICKR SNAP makes indoor training a "snap!" It's a convenient, easy to set-up wheel-on smart trainer with the realistic ride experience Wahoo smart trainers are known for. The SNAP's legendary flywheel features technology that creates the same resistance experienced when riding outdoors. Plus, no other indoor bike trainer has more software training options, including Zwift and Trainer Road. The KICKR SNAP now includes LED lights for connection status, third party power meter support, and the power measurement is now accurate up to +/-3%. Specs: Dimensions (legs open):29" x 26" (74cm x 66cm) Weight: 38lbs Rear Wheel size: 650c RD / 26" MTB / 700c RD / 650b MTB / 29" MTB. Click to check bike compatibility with KICKR SNAP Hub Types: 130mm and 135mm Quick Release and 12x142 Thru-Axle with adapter (sold separately). Warning: Due to variations in thru axle dropouts, it is not possible to guarantee compatibility with all 12x142 bicycles. To fully ensure compatibility, please see the KICKR SNAP Thru Axle Compatibility page, then visit a local Wahoo Fitness retailer to test your bicycle’s fit or contact support before purchasing. Drivetrain: N/A Metrics: Speed, power, distance Front wheel block: Included Resistance type: Electromagnetic Accuracy: +/- 3% Wireless software updates: Yes 3rd party power meter support: Yes Connectivity: ANT+, ANT+ FE-C, and Bluetooth Smart Devices: iOS / Android / PC (Mac and Windows) Max User Weight: 250 lbs Power Requirements: 100-240V~1.5A 50-60 Hz Flywheel Weight: 10.5 lbs Maximum Simulated Grade: 12% Maximum Power Output: 1500 Watts
The iconic FLUX Smart has been upgraded to the FLUX 2 Smart. Compared to its predecessor, it is equipped with a bigger and stronger resistance unit and a heavier flywheel. This resulted in a wider simulation range, better ride feel and a more accurate power measurement.
Page 1 of 1