Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile
Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.
Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.
Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.
Gear up and go long. Axiom's Journey Suspension & Disc Lowrider Front Rack gives you lots of extra carrying capacity. Designed for bikes equipped with front suspension bike and disc brakes, the Journey Suspension rack installs easily and assures excellent clearance so your load doesn't interfere with your bike's functions. With increased height for improved cornering and ground clearance, the Journey is perfect for going deep into the backcountry. It is made of light, rugged aluminum and handles heavy panniers (sold separately) with ease.
Axiom's Journey Rack w/Spring is made of light, rugged aluminum. It can handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags. It also has a platform on top, which adds strength and doubles as a mini fender, and a spring loaded bar to hold down your belongings.
Axiom's Streamliner Road DLX Rack is designed to fit on road bikes that don't have eyelets. It's made of reliable, light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.
Do you have a bicycle with disc brakes and can't find a rack to go with them? Well, grab Axiom's Journey Disc Rack to carry your gear and you're all set for adventure. It's constructed from durable and light aluminum tubing, and has a looped design for excellent support for even heavy loads. There are also rear bars that prevent panniers swinging in and striking the wheel. The right side of the rack mounts to your eyelets, and the left attaches to the disc brake tab. This great rack also has a platform on top, which adds strength and doubles as a mini fender. And there's a place to mount a taillight, too (sold separately). The bicycle industry’s original disc-brake compatible rack. We designed this rack as a problem solver back when disc-brakes were still a new thing. The Journey® Disc remains a favorite to this day thanks to its flexible yet elegant mounting options and industry-leading weight capacity. - Hand-welded, tubular 10.2mm 6061 T6 aluminum. - Extra-long (280mm), adjustable Versalock® arms (for frames with eyelets). - Traditional stay on right (drive side). - Adjustable Versalock® stay on left (disc side). - Triple stay design has a sweepback frame that prevents pannier bags from bouncing into your wheel while you ride. - Suitable for frames where disc-brake placement causes a compatibility issue with traditional racks. - Generous platform size is optimized for top loading things like trunk bags and rear baskets. - Designed for modern bicycles by sitting your load further back over the wheel where it is supposed to sit. - Increased heel clearance. - Enhanced trunk bag / seat clearance improves trunk bag function, especially on smaller frames. - 280mm Versalock® arms are long enough to fit even the smallest of bikes. - Versalock® arms can be DIY bent up to 30 degrees without reducing strength. - Double welded for extra strength and long-term durability. - Ample room for a full range of fender styles - Reflector/light mount, Frame bolts included
Axiom's Streamliner Disc DLX Rack fits on bikes with disc brakes that don't have eyelets. It's made of reliable and light aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Axiom's Streamliner 29er DLX Rack centers loads close to the rear wheel for improved stability and handling on your 29er bike. It's made of reliable and lightweight aluminum, features struts to keep loads from getting close to the rear wheel, and offers ample heel clearance when you're carrying panniers.
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.
- Robust and large front carrier - With stays for mounting on front axle, includes 2 handlebar hooks (for 21-31.8 mm). - Maximum 10kg
- Includes mounting kit, extra tube for bags, spring clamp, fastening option for light (80mm) - MIK profiles, comp. with (MIK) accessories - Max. 30kg, 10mm
All-alloy bike rack securely mounts to bike to hold up to 40 lb. Features - Secure: Triangulated design holds cargo - Fully Adjustable: Adjustable legs and extra long connector stays fit most bikes. Disc-compatible - Construction: Lightweight aluminum with stainless steel hardware - Weight: 1.53 lbs / 694 grams - Max Weight: 40 lb / 18 kg
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light rack. It's got plenty of capacity for those key items on your journey. This model is designed to fit bikes with disc brakes. - Fits bikes with disc brakes: offset with integrated spacer - W-bend stays keep pannier hooks in place - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm
Minoura's KCL-2R Rear Carrier is made from welded steel tubing and mounts to the rear of the bicycles. It has an extra large surface area. - Fits 26 to 700c wheels - 11.4 x 16.9 - Max load of 40 lbs. - Durable black powder coat finish - Made of strong steel tubing
The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you. Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Short fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is for maximum mud clearance and fits tires up to 29 x 3.25" - The Elkhorn comes in two sizes; Short and Tall. - The Short is designed for 27.5 and 700c wheels. Fits tires up to 27.5 x 2.8" or 700c x 50mm. - The Tall is designed for maximum mud clearance and bikes with 29" tires. Fits tires up to 29 x 3.25". - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The rack is made from 1/2" (13mm) diameter tubing. - The deck measures 3.9" x 10.5" (100 mm x 266 mm) The deck includes slots for easily lashing gear in place and holes for mounting a light. - The Elkhorn comes standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Elkhorn has a load capacity of 25 lbs/11.34kg. - Rack weight (Short): 623 grams with 6" extenders. - Rack weight (Tall): 652 grams with 6" extenders. - Powder coated a sleek and refined shade of black. - If you want more precise fit information, the height from the mounting point to the deck is 390mm on the Short and 430mm on the tall. Be sure to leave room for debris and mud clearance. - Made in Taiwan. - Lifetime warranty
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, and even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need. - The Divide Fat fits up to 26×5" or 27.5×4.6" tires. - Front or rear mountable. - Made from 6061 aluminum the racks are lightweight, stiff, and strong. - The main rack frame is made of 1/2" (13 mm) diameter tubing for durability and the pannier rails are 3/8" (10 mm) diameter to fit all panniers. - The low pannier rail makes it a breeze to load and unload panniers with gear lashed to the deck. - The deck measures 5.1" x 12" (130 mm x 306 mm) - The deck includes slots for easily lashing gear in place and holes for mounting a light. - The dropouts are height adjustable to keep the weight loaded low on the bike and fit a wide range of tire sizes. - The Divide Fat come standard, eyelet mount ready with optional fit kits available for thru-axle or QR mounting. - The Divide has a load capacity of 55 lbs when eyelet is mounted. For more adventurous endeavors we offer thru-axle or QR Fit Kits, that mount the rack to the axle and increase the load capacity to a whopping 70 lbs! - Powder coated a sleek and refined shade of black - Made in Taiwan - Stainless Steel mounting hardware - Lifetime warranty!
Origin-8's Classique Sport Rear Rack is a versatile cargo-carrying solution. This lightweight and sturdy tubular 6061-T6-aluminum rack is adjustable to fit bicycles with 26-, 27-, 29-inch, and 700c wheels and is rated to carry up to 55 pounds of gear. It has a durable and attractive polished anodized finish and built-in hooks for your stretch cords, too.
- Front basket rack with integrated U-lock holder - Cargo net holds basket contents securely in place - Mounts to caliper hole and front axle - Adjustable fit for 26", 27.5", 29", and 700c - Heavy-duty AL6061-T6 alloy construction supports up to 55lbs - Platform area measures 12" x 14"
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Planet Bike's Eco Rack is made of oversize tubular 6061-aluminum for maximum strength and stability. It's designed to provide complete heel clearance when you install packs. And, the pre-installed rack hardware makes it a cinch to mount the Eco Rack to your bike, too. This rack fits most road, mountain and hybrid bicycles and even includes a built-in platform, which doubles as a mini-fender on rainy rides.
$44.99 - $49.99
You'll keep on keepin' on with Planet Bike's K.O.K.O. Cargo Rack on your bike. Made of 6061 aluminum for maximum strength and stability, it boasts a wide range of adjustability so it's easy to install and fits most bicycles. There's a taillight mount, too (lights sold separately).
Planet Bike's Versa Rack means your steed with disc brakes can finally be made into a rack-packing workhorse. It's 6061-aluminum construction provides maximum strength and stability. Thanks to the clever design you'll have complete heel clearance when you install packs. Plus, the pre-installed rack hardware makes it a cinch to mount the Versa Rack to your bike.
It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts
Whether you're kitting out your ride to be a full-on grocery-getter or just trying to get that sweaty backpack off your back, this adjustable rack gives you a whole new home for all of your haul-ables! - Aluminum - Carries up to 20 lbs - Easily add a crate! - Fits on all Pure Fix and Pure City bikes EXCEPT Premium Series, Urban Commuter, and Keirin Track Completes
Specifically engineered to fit a 12-pack of beer and your u-lock, this classy rack is ready to haul it all! Whether it's a run to the corner store, class, or just another day at the office the Urban Rack will cradle your essentials comfortably between its tie-down rails, or you can remove the rails to tote extra-wide loads all the way to your destination! - 9 1/2" wide x 11 1/4" long x 3" high for inside rail measurement.
Designed to fit two 18-packs of your favorite beer (or your lunch, laptop, groceries, etc...), this handy rear rack is ready to haul it all! Removable tie-down rails give you somewhere to strap down loose loads or pop them off to create a flat-bed rack that can handle those 3 XL pizzas you just ordered. One ride with this rack and you'll wonder how you ever managed to carry everything without it.
Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.
$49.99 $50.00 On Sale
The Roll Rack fits all Specialized Roll models, as well as most bikes with a 650b wheel size. The rack also features a maximum load capacity of 15kg, and it includes a steel bracket, hook plate, and corrosion-resistant hardware. - Fits all Specialized Roll models, as well as most bikes with a 650b wheel size. - Includes a steel bracket, hook plate, and corrosion-resistant hardware. - Maximum load capacity: 15kg
$59.99 $60.00 On Sale
Specialized's Elite Rear Rack is a versatile rack that allows you to carry your gear wherever you go. •Lightweight, 6061-aluminum construction •Universal fit for 700c bikes •Fast, easy installation •Max load: 25Kg
$74.99 $100.00 25% Off
Versatile aluminum frame rack for transporting everything from postal packages to drybags or a tent on your bike. Attaches directly to the handlebar (fits handlebars with 31.8 mm diameter) and works with all types of bikes, except extreme downhill bikes. An anti-rotation guyline prevents the frame rack from tilting forward. Webbing straps to attach gear are not included. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Light and strong aluminum construction. - Three under-rack accessory mounting holes for lights, cameras, etc. - Max load of 5kg. - Fits handlebars with 31.8 mm diameter and works with most types, including straight and drop models. - Compatible with Specialized's Future Shock suspension system. - Dimensions: 20 x 18 x 13 cm.
$89.99 $90.00 On Sale
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$89.99 $120.00 25% Off
Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.
- Used for attaching rear racks onto mono stay bikes - Rubber coated steel for all weather durability
If you have to carry a bunch of gear, you're going to need a front rack. Sunlite's Gold Tec Front Rack has a capacity of 40 pounds, turning your bike into a serious workhorse. It's made from tubular aluminum and mounts to most fork bosses.
Add some cargo-hauling capacity to your bike with Sunlite's Utili-T QR Beam Rack. It doesn't matter if you are commuting, touring or running errands, this rack holds up to 25 pounds of gear and simply attaches to your post via a quick-release bracket. It also sports side supports for panniers. It fit posts from 25 to 32mm in diameter and is made from lightweight tubular aluminum.
Sunlite's Gold Tech Adjustable Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, adjusts to fit 26-inch and 700c-wheeled bikes, and has a carrying capacity of up to 30 pounds.
Sunlite's Welded Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, fits most bikes, and has a capacity of up to 40 pounds.
Traveling light? Go with Sunlite's Gold Tec Lite Rack. Made from lightweight tubular aluminum, the Gold Tec Lite is durable enough for daily commutes, tough enough for cross-country trips and doesn't weigh you down. The top deck has a capacity of up to 45 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.
Turn your humble bike into a cargo-hauling machine with Sunlite's Gold Tec Sport Rack. Made from lightweight tubular aluminum, the Sport Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers. Plus, it fits both road and mountain bikes.
What does the HD stand for? Heavy Duty. Sunlite's Gold Tec HD Rack is made for the hardcore commuters and tourers out there that load up and ride more than most people drive. Made from lightweight tubular aluminum, the HD Rack is durable enough for daily commutes, tough enough for cross-country trips and doesn't weight you down. The top deck has a capacity of up to 55 pounds and side struts support fully loaded panniers. Plus, it fits both road and mountain bikes.
Sunlite's Gold Tec Disc Rack fits almost any disc brake-equipped bike with wheel sizes of 26-inch, 27-inch, and 700c. Made from lightweight tubular aluminum, the Disc Rack is durable enough for daily commutes and light enough for long tours. The top deck has a capacity of up to 50 pounds and side struts support rear panniers.
Sunlite's Welded Springer Rack is the perfect tool to allow commuters and tourers to carry extra gear. It's made of tough, light tubular aluminum, and has a carrying capacity of up to 50 pounds. Its adjustable design makes installation on 26-inch, 700c, and 27-inch bikes a snap. And, the spring-loaded bar helps hold your stuff securely.
- Adjustable width fits 26, 27.5, or 29 inch frames with 1" to 4" tires - Modular design allows use with a variety of Plus and Fat bikes from 135 - 170mm OLD - Adjustable for 26", 27.5" and 29er wheels - Tubular 6061-T6 alloy construction - Adjustable to fit 1" to 4" width tires - Disc brake compatible
Sunlite's QR-Tec Front Rack replaces your front skewer with its built-in quick-release for easy, secure mounting. Made from lightweight tubular aluminum, the QR-Tec Rack is durable enough for daily commutes and light enough for long tours. It has a capacity of up to 45 pounds and its side struts support panniers.
Rear alloy rack with integrated fishing rod holder Equipped with mounting racks on each side for rod holders One rod holder included that can be mounted on either side Extra rod holders sold separately Universal design has legs that adjust for use with 26" through 29" bikes Type: Rear Mount: Eyelet Color: Black Compatibility: 26" thru 29" Note: Includes 1 Rod Holder Wheel Size: Universal
- Front rack with foldable sides for an expandable platform size - Sturdy powder-coated alloy construction - Can be attached to brake mounts or threaded accessory eyelets - Adjustable legs fit 26" – 29" frame sizes - 22lb weight limit - Disc Compatible: No
$99.99 - $105.99
- Rear rack with folding sides that allow for an easily expandable platform size - Sturdy tubular powder-coated alloy construction - Adjustable legs fit frames from 26" to 29" - Available in disc brake and rim brake compatible models - 59lb weight limit
This tubular alloy front rack with espresso stained wood plank cargo deck is perfect for getting take-out or a 6-pack. Adjustable struts for use with 26-inch through 29-inch wheel sizes. The 15 x 13.25-inch deck supports cargo up to 11 lbs.
We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.
Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
Page 1 of 2 Next page