Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Cables

Wheels Manufacturing Inc. Silver Aluminum Cable Housing Ferrules: Bottle of 100
$40.00
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle
Vision Brake Cable
$5.99
- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually
Sunlite Brake Cable
$6.29
• MTB or Road • Stainless steel • 1.5mm diameter • 2000mm length
Sunlite Brake Cable with Housing
$4.49
• Galvanized steel inner wire • Standard 5mm brake housing • Front or Rear
Sunlite Cable End Button
$0.79
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
Sunlite Cantilever Link Wire
$3.99
- Replacement link wire for cantilever brakes
Sunlite Economy Cable Housing
$21.29
- 50 feet (15.2 meters) length - 5mm diameter cable housing - For brake cables
Sunlite Galvanized Brake Cable
$2.79
• MTB or Road • 1.5 x 1855mm • Galvanized
Sunlite Galvanized Brake Cable (Tandem)
$2.79
• MTB or Road • 1.5 x 2667mm • Galvanized
Sunlite Gear Cable/Housing
$4.99
• Galvanized steel inner wire • Standard 5mm S.I.S. housing • Front or Rear • Mountain or road
Sunlite Housing Ferrules
$0.39
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Sunlite Lined Brake Cable Housing
$22.49
• 50 feet (15.2 meters) length • 5mm diameter brake cable housing
Sunlite Micro Adjust Cable Stop
$11.29
- Designed to work with existing cable stops - Micro adjusting for precision shifting - Steel construction
Sunlite Nylon Cable Guide
$1.79
- Routes cables underneath the bottom bracket - Will not rust or corrode
Sunlite Premium SLR Lined Housing
$47.49
- Use: Brake - Length: 30mm - Diameter: 5mm
Sunlite SIS 4mm Cable Housing
$32.49
• Multi-strand construction • Length: 25 feet • Size: 4mm
Sunlite SIS 5mm Cable Housing
$32.49
• Multi-strand construction • Length: 25 feet • Size: 5mm
Sunlite SIS Housing Boxes
$77.49 - $112.49
- Use: S.I.S. - Length: 30mm
Sunlite Shift Cables
$2.79 - $6.29
Shifting cables for Road/Mountain bikes.
Sunlite Slick Brake Cable w/Housing
$4.99
• Galvanized steel inner wire • PTFE lined brake housing • Front or Rear • Mountain or road
Sunlite Slick-Coated Gear Cable
$8.29
• Stainless steel shifter cable • PTFE-coated for reduced friction • Length: 2000mm
Sunlite Stainless Brake Cable
$7.49
• For mountain bike cable-actuated brakes • 1.5mm x 3000mm • Stainless steel
Sunlite Steel Brake Cable Hanger
$3.99
- Replacement front cable hanger - Steel construction - Includes barrel adjuster
Sunlite Straddle Cable
$4.99
• Fits cantilever brakes • Sold individually
Sunlite Three-Speed Cable
$7.49
- Complete cable kits for internal three speed hubs
Sunlite V-Brake Cable Boot
$1.49
- Rubber - Color: Black
Sunlite V-Brake Cable Noodle
$3.29 - $3.99
- Steel cable noodle with alloy end caps - Includes plastic liner
SRAM Brake And Derailleur Casing
$43.90 - $89.90
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
SRAM Ferrule Kit Aluminum 4mm & 5mm
$21.00
SRAM's Ferrule Kit is just the thing to keep on hand for your brake- and shift-cable replacement and repairs. You get 10 4mm-diameter aluminum shift ferrules, 6 5mm-diameter aluminum brake ferrules, plus 3 aluminum cable crimps to prevent frayed cables.
SRAM Guide Hydraulic Line Kit
$45.00
SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes.
SRAM Inline Barrel Adjuster
$18.00
SRAM's Inline Barrel Adjusters are placed on your shift cables near the handlebars so that you can turn the adjusters to fine-tune your shifting. They feature durable and light aluminum/composite construction with rubber covers for easy operation.
SRAM Road Disc Brake Hydraulic Line Kit
$47.00
Original equipment hydraulic hoses for no-compromise brake performance. - Hose Use: Front, Rear - Available in black - 2000mm hose length
SRAM Stainless Brake Cable
$6.00 - $9.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
SRAM Stainless Brake MTB Cable
$6.00
- Front and rear brake - For Mountain Bike Applications - 1.5mm stainless cable
SRAM Stainless Derailleur Cable
$6.00 - $7.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
Origin8 Braze-On Cable Stop w/Barrel Adjuster
$11.99
Origin-8's Braze-On Cable Stop with adjuster allows you to convert to STI style shifters. They mount onto down tube Braze-on bosses and are machined alloy with an anodized finish. The lightweight design lets you make the conversion without adding too much extra weight. One pair per package.
Origin8 Clamp-On Double Cable Stop
$8.79
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8 Clamp-On Single Cable Stop
$7.99
Ditch the zip ties and clean up the look of your cables with Origin-8's Clamp-on Frame Cable Stop. Available in a variety of diameters for different sized round frame tubes, the cable stop bolts on and provides a channel to run rear brake or derailleur housing to hold it securely in place. It's made of lightweight CNC'd aluminum.
Origin8 Fork-Mount Brake Cable Hanger
$10.99
Alleviate brake cable alignment and tangles with Origin-8's Fork Mount Cable Hanger. Made from forged aluminum, it mounts easily to the hole in your bike's fork crown. • Forged aluminum construction • Mounts to most frame or fork mounting holes • Great for tricky cantilever brake setups • Lightweight design • Front for fork mount / Rear for frame mount
Origin8 In-Line Barrel Adjuster Kit
$8.79
In-line cable tension adjusters - Indexed fine-tuning allows you to feel each "click" of adjustment and prevents loosening from vibration - Fits cable housing without ferrules
Origin8 Mechanical Disc Brake Cable Stop Converter
$12.99
Origin-8's Alloy Braze-on Inserts convert hydraulic pass-throughs to cable stops so you can run full length housing. Designed for frames with pass through braze ons and sold in a bag of 10.
Origin8 Plastic Cable Guides
$4.59
Origin-8 Plastic Cable Guides provide a quick, easy, clean routing system for your cables. Great for disc brake lines or for rear brake cable housing guides, they mount to any frame type. The plastic guide will not damage the frame and no need to worry about corrosion. - Zip ties to frame - 2 per package
Origin8 Pro Pulley Cable Guide
$10.99
Origin-8's Pro Cable Guide Pulley fulfills all your special cable routing needs. Designed to clamp onto seat tube, it allows you to route your cable for bottom pull front derailleurs. Uses a sealed bearing pulley.
Origin8 Rear-Mount Brake Cable Hanger
$10.99
Alleviate brake cable alignment and tangles with Origin-8's Rear-Mount Cable Hanger. Made from forged aluminum, it mounts to most brake bridge mounting holes and is great for solving tricky cantilever brake set up problems. • Forged aluminum construction • Mounts to most frame mounting holes • Great for tricky cantilever brake setups • Lightweight design
Origin8 Super Noodle for Linear Pull Brakes
$2.99
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable. • Lightweight resin/alloy design
Origin8 V-Brake Noodle w/Barrel Adjuster
$5.59
Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.
Odyssey Adjustable Quik Slic Kable
$13.99
As the name implies, this new version can be easily adjusted to cover 3 different lengths by utilizing the cable’s unique straddle interface connection. This tool-free feature allows the Adjustable Quik Slic Kable to be a one-size-fits-all cable for virtually every braking configuration. FEATURES - Adjustable hanger slot allows upper cable to rotate for optimum alignment. - The integrated hanger and straddle cable creates direct routing to brake arms with no bends or twists to reduce flex. - Linear K-Shield mesh housing offers higher compression rate and lighter weight than standard steel mesh. - All Odyssey Linear cables are offered with the K-Shield housing. - Specially designed and machined Volcano ferrules prevent premature housing blowout. Velcro strap included. SPECS - Housing length: 995mm - Frame requirements: Slotted cable stop and guides. 245mm (+/-3) distance from center brake boss to the front of the cable stop is recommended. - Brake requirements: Open-ended U-brake arms. - Works with most brake levers. - Velcro strap included.
Odyssey Cable Knarps
$2.99
- Sold in pairs. - Allen wrench included.
Odyssey Linear SLS Slic Kable
$12.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length.
Odyssey Linear Slic Kable w/K-Shield
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz)
Odyssey London Mod Cable Adaptor
$3.99
London Mod cable adapter for routing dual cables.
Odyssey M2 Brake Cable
$5.99
Compatible cable for M2 Monolever.
Odyssey Slic Kable Brake Cable/Housing Set
$3.50 - $3.99
The Slic-Kable features a low friction inner wire for smooth braking.
Jagwire Aluminum Housing Connectors
$8.99
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4, 4.5 and 5mm diameter. Match the diameter of the housing sections on your bike.
Jagwire Cable Guide Stopper 5mm
$8.99
Jagwire's Cable Guide Stoppers are quality aluminum adapters that let you convert open-style cable housing stops on your bicycle frame so that they will hold 5mm-diameter standard cable housing sections.
Jagwire Frame-Mount Adjusting Barrels
$7.20 - $8.99
Jagwire's Frame-Mount Adjusting Barrels thread into the housing stops on most road frames and allow easy adjustment of cable tension for fine-tuning your shifting. They are made of aluminum for light weight and durability and have knurled rubber-coated rings for easy turning by hand.
Jagwire Internal Housing Damper
$29.99
Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10 meter shops rolls can be cut to length to suit each bike's needs - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose
Jagwire Mini Tube Top Frame Protectors
$9.99 - $65.99
Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.
Jagwire Mountain Sport Brake Cable
$4.99 - $239.99
Jagwire file boxes pack a lot of cables into a small space for easy access. - Pre-stretched - Single-ended cables feature a weld-cut for ease of installation - SRAM/Shimano mountain compatible cable end - Slick cable is die-extruded for smooth operation - Stainless steel option resists corrosion - Cable Head: Shimano/SRAM Mountain - Defined Color: Silver - Diameter: 1.5mm - Double Ended: No - Length: 1700mm - Quantity Included: 100 - Width: 1.5mm
Jagwire Open End Caps for Brake Housing
$12.99 - $60.99
Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.
Page 1 of 2 Next page