Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height = 9mm
Replacement springs for Cane Creek Helm suspension forks.
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
- Simple tension seeker (STS) allows the use of a 1 speed drivetrain on a vertical drop frame - Perfect for street or dirt jump where simplicity and durability is key - Stainless steel arm mounts to derailleur hanger and dropout - Loosen bolt and swing down and back to adjust chain tension - High density polyurethane pulley with sealed cartridge bearings
- Specially shaped composite material helps prevent chain derailment when shifting to inner ring - Split clamp design mounts to specific seat tube diameters, eliminating the need for a metal fitment clamp
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
- Aluminum straddle cable carrier for cantilever brake
$35.01 - $38.19
- Dispenser of chromed ferrules
Dimension Seatpost Binder Bolts - 16g
Heavy duty bolt-on aluminum seatpost clamp.
Dimension Seatpost Clamps - Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm - Weight: 34g
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.
Spacers for Easton bottom brackets.
$27.00 - $28.00
- Blue polyurethane upgrade dust wipers and oil seals - Dual lip offers improved seal with lower stiction - Fox 32mm and 36mm kits include wipers, oil seals, crush washers, and foam rings - Fox 40mm kits include wipers and seals
Stainless steel pedal washers - Sold in pairs
Weight-savings is no excuse to have an ill-fitting cockpit. Shave every possible gram with these Carbon Headset Spacers from FSA, and ensure your bike fit is right on the money.
This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen. - For road use - Weight: 50g
$12.99 - $14.99
Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers
$12.99 - $14.99
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug. - Alloy top cap - For carbon steer tubes
This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers