Other

IFP Height Tool, (100mm Travel), 2021-on Transfer

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Parts for repair and maintenance of DT Swiss hubs.

Replacement pulley set with ceramic bearings. Compatible with 7,8,9, and 10-speed Campagnolo, Shimano, and SRAM drivetrains.

Surly Thru-Axles are low-profile, bolted Thru-Axles are specifically designed for use with Surly thru-axle compatible frames. Offered in several sizes, for both front and rear wheels. 12x142 Rear Thru Axle: - Fits: Midnight Special and MDS Dropout bikes including Instigator, Legacy Karate Monkey & Legacy Krampus. 12x142/148 Rear Thru Axle: - Designed for frames with Surly Gnot Boost spacing (145mm), capable of working with 142 or 148mm rear hubs - Fits: Karate Monkey, Krampus, Troll, Ogre, ECR 12x177 Rear Thru Axle: - Fits: Wednesday 12x197 Rear Thru Axle: - Fits: Ice Cream Truck, Big Fat Dummy 12x100 Front Thru Axle: - Fits: Midnight Special 15x110 Front Thru Axle: - Fits: Karate Monkey, Krampus 15x150 Front Thru Axle: - Fits: Wednesday, Ice Cream Truck, Big Fat Dummy

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

Magura Caliper Cover Ring Kit

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Replacement brake hoods for Origin8 Classique Sport road levers

The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Flat Mount Disc Caliper Bracket Bolts

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains

Dimension Seatpost Binder Bolts - 16g

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 16mm long and made of rustproof stainless steel.

The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors

Replacement top caps for various RockShox suspension forks.

Chainring spacer for adjusting the chainline on inner and middle chainrings. - Bag of 20